Ender 5 Plus Ultimate Upgrade! BIGTREETECH 32bit 1.4 SKR TURBO & BIGTREETECH TFT35 V3.0 | Clip game mới nhất từ Bem2

Có phải bạn đang muốn xem Video game mà Bem2 cung cấp đúng không? Có phải bạn đang tìm chủ đề ender’s game clip 1 đúng vậy không? Nếu đúng như vậy thì mời bạn xem những thông tin về nội dung này tại đây nhé.

Ender 5 Plus Ultimate Upgrade! BIGTREETECH 32bit 1.4 SKR TURBO & BIGTREETECH TFT35 V3.0 | Tổng hợp những Clip game hay nhất.

[button size=”medium” style=”primary” text=”XEM VIDEO CHI TIẾT Ở BÊN DƯỚI” link=”#” target=””]

.

Hình ảnh liên quan đến chủ đề ender’s game clip 1.

Ender 5 Plus Ultimate Upgrade!   BIGTREETECH 32bit 1.4 SKR TURBO & BIGTREETECH TFT35 V3.0


#creality # ender5plus #bigtreetech # Kay3D Ender 5 Plus Silent Board Nâng cấp! Thêm nữa! Chào mừng bạn đến với video lớn nhất của tôi! Đây là bản nâng cấp cuối cùng lên Ender 5 Plus! Đây là toàn bộ quá trình nâng cấp từ A -Z. Tôi sẽ sử dụng Màn hình hai chế độ BigtreeTech 32bit Skr 1.4Turbo & Bigtreetech TFT35 V3.0. Tôi sẽ hướng dẫn bạn toàn bộ quá trình nâng cấp từ đầu đến cuối! Bao gồm cả cách đặt biểu tượng cá nhân của bạn trên màn hình Bigtreetech TFT35! Đúng! Bear trong video, anh ấy là “Waldo ở đâu!” Hãy cho tôi biết bằng dấu thời gian trong phần nhận xét khi bạn nhìn thấy anh ấy! BigtreeTech 32bit Skr 1.4Turbo BigtreeTech TFT35 Birgtreetech TMC2208 V3.0 TH3Dstudio Sơ đồ bo mạch SD Mở rộng thẻ hiển thị Giá treo bảng Mount GitHub – Firmware đã cấu hình Visual Studio Code Cheetah Firmware Kay3D Kay3D Nhóm Facebook Chuyển đến các phần của video Giới thiệu – 4:11 Thông tin về bo mạch Bigtreetech 8 : 45 Thông tin hiển thị Bigtreetech 11:03 Thêm trình điều khiển TMC2208 11:39 Tháo các bộ phận khỏi hộp điện tử 14:12 Đấu dây 15:08 Ảnh nối dây 15:46 Cắt hộp điện tử 17:38 Visual Studio Code cài đặt và cấu hình 18:31 Cheetah Marlin tải xuống 20:29 Cấu hình Cheetah Marlin 40:46 Hoàn thiện hệ thống dây điện bao gồm màn hình 49:02 Cập nhật flash BTT 3.5 hiển thị và cập nhật logo 59:57 Bản in thử nghiệm 1:01:07 So sánh bản in 1:07:56 Kết luận và đánh giá Cảm ơn bạn đã xem! Bàn làm việc của Harbour Freight – Disclaimer – Đây chỉ là video hướng dẫn – Tôi không chịu trách nhiệm nếu bạn không trở thành chuyên gia sau khi xem video này. Video này chỉ dành cho mục đích học tập, bạn đang làm theo các bước trong video này tự chịu rủi ro! Thanks for watching – Please Like and Subscribe! Thẻ BTT SKR V1.4 & SKR V1.4, Bảng điều khiển 32-bit, BIGTREETECH TFT35 V3.0 Display- Hai chế độ làm việc, Bảng im lặng, TMC2208, BIGTREETECH TMC2100 TMC2208 V3.0 TMC2130 V3.0 Trình điều khiển động cơ bước, Máy in 3D , In 3D, Bigtreetech 32bit 1.4 Skr Turbo, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, bảng im lặng creality, bảng im lặng..

>> Ngoài xem bài viết về nội dung Ender 5 Plus Ultimate Upgrade! BIGTREETECH 32bit 1.4 SKR TURBO & BIGTREETECH TFT35 V3.0 này bạn có thể xem thêm nhiều Clip game khác tại đây: ở đây.

Vậy là bạn đã xem xong bài viết chủ đề ender’s game clip 1 rồi nhé. Ngoài xem các Video game mà chúng tôi cung cấp thì bạn có thể xem thêm nhiều thông tin liên quan đến game, thủ thuật, hướng dẫn, clip game… tại đây nhé: ngay chổ này.

Tag liên quan đến nội dung ender’s game clip 1.

3D Printer,Noob,Unboxing,Ender 5 Plus,Ender 5+,E5+,Assembly,ADA,One Leg,Disability,Cancer,Harbor Freight workbench,dji,osmo,gimbal,wiring,diy,bigtreetech,skr1.4 turbo,BTT SKR V1.4 & SKR V1.4,32-Bit Control Board,BIGTREETECH TFT35 V3.0 Display- Two Working Modes,BIGTREETECH TFT35 V3.0,TMC2208,TMC2208 V3.0,creality,CR-10,Creality Ender 5 Plus,Ender 5 Plus Ultimate Upgrade,creality silent board,silent board.

Rất mong những thông tin về game do Bem2 cung cấp sẽ mang nhiều giá trị cho bạn. Xin chân thành cảm ơn bạn đã theo dõi bài viết chủ đề ender’s game clip 1 của chúng tôi.

Bài viết liên quan

Subscribe
Notify of
guest
24 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Scott Duede

Thanks, man! This video is really useful in teaching my kids how to code!

Higher Primate

Great stuff man, ive watched this a few times now in preparation for my board! Gets here Tomorrow!

Last Call Québec

27:02 how to actualy mesure the value #define Total_filament_path … is it the hole lenth of my boewden tubing ?

Mark Kratz

Great video but having problem with extruder. It won’t extrude when printing, but works through display manually.

KoviRobi

Thank you, I broke my silent board USB, and Creality didn't (still doesn't) currently ship to the UK. So I found this on alternative control boards, and it was very helpful! I have ended up using Klipper firmware, I'm happy with the results. Though I should say Klipper doesn't support the TFT35 currently (12864 emulation mode is lacking a feature that Klipper uses, apparently).

Xiaowen Hogue

Great video. I'm wondering if you had any issues with Z Home not moving the bed? I can move bed and it can see the BLTouch but when I tried to use Auto Home or Home Z it doesn't move the bed.

Rogue Hogue

Do you think you could have avoided moving the power switch by threading the SD card adapter though one of the side vents?

Higher Primate

Go Bears! Even though Im embarrassed to say that haha. From Chicago area I assume? Im downstate!

Ochumy

hi i´ve the same printer than you and i dont get that my filament sensor works…. it shows filament runout if i set on mode at menu… any idea?

Reece Engineering

23:25 Why would you not select the TFT35 graphics display option? It says to select that if you are using BTT TFT screens

Scott Pavlovec

You are running your bed way too cool. Need 70-90 on the E5P for consistent bed heat distribution.

Kai Compton

Im having an issue with aux leveling. It only does a small square on the first quadrant of the bed as if it was an ender 3 bed for the 4 points. abl works fine, but obviously useless if i cant level it by hand first

Attila Szabo

Nowadays it would be just so simple and cheap to connect a laptop or tablet with the right software/app and controll the machine with it. I am wondering why is so necessary to hassle with all these

kilroy07

A couple drops of rubbing alcohol will make the hot glue pop right off!

Imran Ahmed

Hey I wanted to make my own 3D printer can i use BIGTREETECH 32bit 1.4 SKR TURBO for it ? or it only supports Ender series printer because I can only find videos with the Ender series .

william feijen

thanks for your video! one of the best tutorials on youtube. I got everything working except for the bltouch, the bed doesn't want to 'come up' to reach the probe. will try some more tomorrow!

anthony handley

Used the same files as the video except changed the drivers to 2209 and says no printer attached on the touch screen mode. Tried everything changed the rates and all.

I'm sure you had a GREAT link to firmware.bin but now I can't find it, can you help?

Polycarbonate (*Lexan) 3D Print Surface

https://youtu.be/Xrh5TAf70ZM

* I believe Lexan is a Trade Name.

2mm Clear Perspex Sheet Screen.

Polycarbonate Solid Sheet Cut to Size (377 x 370mm)

eBay Seller: decoridea)

A BIG THANK YOU to YouTuber :

3dp blog

https://www.youtube.com/channel/UCGGK

Video

3d printing bed build surface for 2 bucks – polycarbonate (Lexan) (I think it is $20.00)

https://youtu.be/Ary-HZarFAo

Creality Ender 5 Plus.I am using a BigTree Tech SKR 1.4 Trubo

and a TFT 3.5 Display

Firmware A BIG THANK YOU to

YouTuber : Tripods Garage

https://www.youtube.com/c/TripodsGara

Graph Paper. Note: this is 6mm squares

http://www.template.net

MrSjirafje

Is it possible to upgrade to the SKR board and keep using the original screen?

Kevin Britain

Thanks for this bud.. long but really educational..

It may be possible to print directly from the SD Card on the Bigtree Tech board Configuration_adv.h

I can't test this because of bugs in Malin code

// Add an optimized binary file transfer mode, initiated with 'M28 B1'

//#define BINARY_FILE_TRANSFER

/**

* Set this option to one of the following (or the board's defaults apply):

*

* LCD – Use the SD drive in the external LCD controller.

* ONBOARD – Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)

* CUSTOM_CABLE – Use a custom cable to access the SD (as defined in a pins file).

*

* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]

*/

//#define SDCARD_CONNECTION LCD

#if ENABLED(SDCARD_BOARD_FIX)

#define SDCARD_CONNECTION ONBOARD // Forces SD card to work on mainboard. Some boards do not need this fix.

#endif

#if ENABLED(SDCARD_LCD_FIX)

#define SDCARD_CONNECTION LCD // Forces SD card to work on external LCD/ TFT. Some screens do not need this fix.

#endif

I am a NOOB:- erros such as, (but it said SUCESS at the end) can you help?
Compiling .piobuildLPC1769srcsrcsdusb_flashdrivelib-uhs2parsetools.cpp.o

In file included from Marlinsrcmodulesteppertrinamic.h:35,

from Marlinsrcmodulesteppertrinamic.cpp:32:

Marlinsrcmodulestepper../../feature/tmc_util.h: In instantiation of 'TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID>::TMCMarlin(uint16_t, uint16_t, float, uint8_t, bool) [with char AXIS_LETTER = 'X'; char DRIVER_ID = '0'; AxisEnum AXIS_ID = X_AXIS; uint16_t = short unsigned int; uint8_t = unsigned char]':

Marlinsrcmodulesteppertrinamic.cpp:225:7: required from here

Marlinsrcmodulestepper../../feature/tmc_util.h:162:40: warning: 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float, bool)' is deprecated: Boolean argument has been deprecated and does nothing [-Wdeprecated-declarations]

162 | TMC2208Stepper(RX, TX, RS, has_rx)

| ^

In file included from Marlinsrcmodulesteppertrinamic.h:29,

from Marlinsrcmodulesteppertrinamic.cpp:32:

.piolibdepsLPC1769TMCSteppersrc/TMCStepper.h:824:4: note: declared here

824 | TMC2208Stepper(uint16_t SW_RX_pin, uint16_t SW_TX_pin, float RS, bool) :

| ^~~~~~~~~~~~~~

In file included from Marlinsrcmodulesteppertrinamic.h:35,

from Marlinsrcmodulesteppertrinamic.cpp:32:

Marlinsrcmodulestepper../../feature/tmc_util.h: In instantiation of 'TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID>::TMCMarlin(uint16_t, uint16_t, float, uint8_t, bool) [with char AXIS_LETTER = 'Y'; char DRIVER_ID = '0'; AxisEnum AXIS_ID = Y_AXIS; uint16_t = short unsigned int; uint8_t = unsigned char]':

Marlinsrcmodulesteppertrinamic.cpp:239:7: required from here

Marlinsrcmodulestepper../../feature/tmc_util.h:162:40: warning: 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float, bool)' is deprecated: Boolean argument has been deprecated and does nothing [-Wdeprecated-declarations]

162 | TMC2208Stepper(RX, TX, RS, has_rx)

| ^

In file included from Marlinsrcmodulesteppertrinamic.h:29,

from Marlinsrcmodulesteppertrinamic.cpp:32:

.piolibdepsLPC1769TMCSteppersrc/TMCStepper.h:824:4: note: declared here

824 | TMC2208Stepper(uint16_t SW_RX_pin, uint16_t SW_TX_pin, float RS, bool) :

| ^~~~~~~~~~~~~~

In file included from Marlinsrcmodulesteppertrinamic.h:35,

from Marlinsrcmodulesteppertrinamic.cpp:32:

Marlinsrcmodulestepper../../feature/tmc_util.h: In instantiation of 'TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID>::TMCMarlin(uint16_t, uint16_t, float, uint8_t, bool) [with char AXIS_LETTER = 'Z'; char DRIVER_ID = '0'; AxisEnum AXIS_ID = Z_AXIS; uint16_t = short unsigned int; uint8_t = unsigned char]':

Marlinsrcmodulesteppertrinamic.cpp:253:7: required from here

Marlinsrcmodulestepper../../feature/tmc_util.h:162:40: warning: 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float, bool)' is deprecated: Boolean argument has been deprecated and does nothing [-Wdeprecated-declarations]

162 | TMC2208Stepper(RX, TX, RS, has_rx)

| ^

In file included from Marlinsrcmodulesteppertrinamic.h:29,

from Marlinsrcmodulesteppertrinamic.cpp:32:

.piolibdepsLPC1769TMCSteppersrc/TMCStepper.h:824:4: note: declared here

824 | TMC2208Stepper(uint16_t SW_RX_pin, uint16_t SW_TX_pin, float RS, bool) :

| ^~~~~~~~~~~~~~

In file included from Marlinsrcmodulesteppertrinamic.h:35,

from Marlinsrcmodulesteppertrinamic.cpp:32:

Marlinsrcmodulestepper../../feature/tmc_util.h: In instantiation of 'TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID>::TMCMarlin(uint16_t, uint16_t, float, uint8_t, bool) [with char AXIS_LETTER = 'E'; char DRIVER_ID = '0'; AxisEnum AXIS_ID = E_AXIS; uint16_t = short unsigned int; uint8_t = unsigned char]':

Marlinsrcmodulesteppertrinamic.cpp:281:7: required from here

Marlinsrcmodulestepper../../feature/tmc_util.h:162:40: warning: 'TMC2208Stepper::TMC2208Stepper(uint16_t, uint16_t, float, bool)' is deprecated: Boolean argument has been deprecated and does nothing [-Wdeprecated-declarations]

162 | TMC2208Stepper(RX, TX, RS, has_rx)

| ^

In file included from Marlinsrcmodulesteppertrinamic.h:29,

from Marlinsrcmodulesteppertrinamic.cpp:32:

.piolibdepsLPC1769TMCSteppersrc/TMCStepper.h:824:4: note: declared here

824 | TMC2208Stepper(uint16_t SW_RX_pin, uint16_t SW_TX_pin, float RS, bool) :

What does LCD12864 setting "Change Media" do? Thank YOU 2000%